Aluminium Partition Cost Estimator
Estimate office and shop partitions by area, with glazed or panelled infill.
Estimate your cost
What drives the price
Partitions are measured on the face area of the screen - the width along the floor multiplied by the height you want it to reach. Decide first whether the partition goes to the false ceiling or to the slab above it, because that single choice changes both the area and what the partition is actually capable of.
Framed, frameless, or acoustic
- Framed aluminium carries the glass in a visible section. It is the most economical, the easiest to alter later, and perfectly suited to dividing a workspace where sound is not the point.
- Frameless 12 mm toughened glass has no vertical framing between panels, which looks considerably better and costs more in both glass and fixing precision. The glass must be made to size: a frameless panel cannot be trimmed on site.
- Acoustic means double glass with an air gap, seals at every edge, and a partition taken to the slab rather than the ceiling tile. Any of those three missing and the sound simply travels over or around it.
The acoustic trap
Most disappointment with office partitions comes from expecting a single glazed screen stopped at the false ceiling to make a room quiet. It will not, however thick the glass is. If privacy is the requirement, say so at the quoting stage so the partition is designed for it rather than priced as decoration.
Doors within the partition
A door opening is usually priced separately from the screen area, and a frameless glass door needs floor springs or patch fittings that are a meaningful cost of their own. Count your doors before comparing two quotes.