General Fabrication Estimators

Steel Fabrication Cost per kg Calculator

Work out what a per-kilogram rate means for a finished item, including fabrication.

Mild Steel

Estimate your cost

What drives the price

A great deal of fabrication is sold by weight rather than by size. The fabricator weighs the finished item, or calculates it from the sections used, and multiplies by a rate per kilogram that already includes cutting, welding, grinding, finishing and fitting. Gates, grills, frames, brackets and structural work are commonly billed this way.

Estimating the weight before anything is made

Work out the total running length of each section in the design and multiply by that section's weight per metre, which any supplier can give you. A 40x40x2 mm MS box is roughly 2.3 kg per metre, so 30 metres of it is about 69 kg. Add 5 to 10 percent for plates, gussets and welds.

Why the material changes the rate so much

  • MS is the baseline. Easy to cut and weld, and the raw material is the cheapest of the three.
  • SS 304 costs several times more per kg, partly in raw material and partly because welding and finishing stainless to a clean result is slower and more skilled work.
  • Aluminium is light but expensive by weight, and the rate reflects that an aluminium job needs fewer kilograms overall. Comparing a per-kg aluminium rate against a per-kg MS rate directly is misleading - compare finished prices.

Questions worth asking

Is the quoted rate inclusive of finishing, or is painting or polishing extra? Is the weight the fabricator's calculation or an actual weighing? And is hardware - hinges, locks, wheels - inside the per-kg rate or billed on top? These three answers explain most of the difference between two quotes that look far apart.