Roofing and Pergolas

Metal Roofing Cost Calculator

Estimate sheet roofing by covered area, sheet profile, thickness and frame.

Galvanized Steel

Estimate your cost

What drives the price

Metal roofing is quoted per square foot of roof area, which is not the same as the floor area underneath it. A pitched roof covers more surface than the room below, and overhangs add further. Measure the slope length, not the plan width, or the estimate will come in low.

Sheet choice

  • Galvanised. Zinc-coated steel, the economical option, and entirely adequate for a shed, a store or a temporary cover.
  • Colour coated. A galvanised or galvalume base with a baked paint system. It lasts longer, runs cooler, and looks like a finished building rather than a shelter. Ask for the coating thickness and the base metal thickness separately - a thin sheet with thick paint is still a thin sheet.
  • Standing seam and insulated panels. Concealed fixings mean no screw holes through the sheet, which is where leaks eventually start. Insulated panels add a foam core that makes a real difference to the temperature below.

The structure beneath

Sheet price is only part of the job. Purlins, rafters and their spacing are sized for the span and the wind, and on an exposed terrace or an upper floor that structure can cost as much as the covering. A quote that seems cheap per square foot is often assuming a lighter frame than the site needs.

Details that decide whether it leaks

Ridge caps, side flashing, the overlap between sheets, and sealing washers under every screw are what keep water out. Ask whether these are included. A roof fails at its edges and its fixings long before the sheet itself gives up.