A custom double door is one of the few things in a house that is genuinely made to order. Nothing about it comes off a shelf, which means every detail that is not written down is a detail somebody will assume — and the two people assuming are rarely assuming the same thing.
Here is the checklist, in the order the arguments usually happen.
1. Decide what the size refers to. Before anything else.
Say “5 foot 9 by 8 foot” to three people and you will get three doors.
- The masonry opening — the hole in the wall.
- The frame outside — the overall size of the chaukhat.
- The clear passage — what you can actually carry a sofa through.
On a door this size those three differ by five to eight inches. A 5′9″ masonry opening gives perhaps 5′2″ of clear passage once the frame and the leaf rebates are taken out. If your drawing says one and your maker assumes another, the door is wrong before anyone touches a saw.
Write it on the order in words: “5′9″ × 8′0″ is the finished masonry opening after plaster.”
2. Measure after plastering, never before
Plaster takes 12 to 20 mm off each side and the head. Measure the bare brickwork and the frame will be loose; pack it out and you have a gap that has to be filled, which on an acoustic door is a hole in the specification.
If the programme will not allow it, measure the brick opening and agree in writing what the plaster thickness will be — then hold the mason to it.
3. Work out the weight before choosing hardware
A 45–55 mm solid leaf with an acoustic core, at roughly 2′10″ by 8′, lands around 70 to 90 kg. People consistently underestimate this, and the consequences all show up months later:
- Four hinges per leaf, ball-bearing, rated for the weight. Three pressed butts will sag, and a sagging leaf stops sealing at the top corner first.
- A mortise lock sized for the leaf thickness, not whatever came in the box with the handles.
- A frame fixed back to structure. Masonry anchors or a steel sub-frame. Screwing a 90 kg door to a plasterboard return is how a frame ends up on the floor.
- Two people and a plan to get it up the stairs. Ask about the floor and the lift before the delivery day.
4. Name the timber properly
“Hardwood” is not a specification, it is a category. Teak, sal, sheesham, meranti and rubberwood are all hardwoods and the price range across them is several-fold.
Specify the species, and ask two questions: how long has the stock been seasoned, and is the leaf solid timber throughout or solid facings over an engineered core? For an eight foot leaf the second is usually the better answer — a stable inner board is what keeps a door that tall flat — but you should know which you are buying.
5. Put the core and the seals on the order as separate lines
On an acoustic door these are the items that get quietly value-engineered out when a quote is being sharpened, because neither is visible in the finished product.
- Core material, density and number of layers.
- Head seal, jamb seals, meeting stile seal, threshold drop seal — four lines, not one word.
- Whether the meeting stile is rebated.
If they are separate lines, removing one is a visible change to the quotation. If they are bundled into “soundproof door”, removing one is invisible.
6. Agree the finish system, not the word “polish”
Matt PU is an excellent choice for a large plain door — it wets the grain, handles fingerprints and does not show surface ripple the way gloss does. But “PU polish” covers a lot of ground.
- How many coats, and is the grain filled first.
- Workshop or site. Workshop spraying is cleaner and more even; site finishing risks dust and an uneven day.
- All six faces. Both faces and all four edges, including the top edge nobody sees. Finishing one side only is the most common cause of a bowed door.
- UV stability, if any part of it catches direct sun.
7. Be specific about the brass
Solid brass and brass-plated zinc look identical in a showroom. After two years of hands on them they do not. Ask which it is.
Then decide on lacquer: lacquered brass stays bright for years and eventually chips, after which it looks worse than bare brass ever did. Unlacquered brass darkens into a patina from the first month. Both are fine. Being surprised by either is not.
8. Fix the handover points
- Who makes the opening good, and to what tolerance.
- Who fits — the maker, or your own carpenter.
- What happens if the opening is out of square on delivery day.
- What the warranty covers, and specifically whether warping is included.
The one-paragraph version
State what the size refers to, measure after plaster, name the species, list the core and all four seals as separate lines, specify the finish system and all six faces, say whether the brass is solid, and count the hinges. Eight sentences on an order form prevent almost every argument that this kind of door produces.
Further reading
How a soundproof door actually works · The 5′9″ × 8′ acoustic doorset · Door makers in Ranchi