A solid wood acoustic door is the same object everywhere. The paperwork around it is not. Ask for a 40 dB door in London, Dubai and Chicago and you will be quoted against three different standards, in two different measurement systems, in timber that is local in one place and imported in the others.
This page is about briefing a maker wherever you happen to be building, and knowing which part of their answer is a real number.
Rw and STC are not the same number
They measure the same thing differently, and confusing them is the commonest mistake in an international enquiry.
- Rw — the weighted sound reduction index, tested to ISO 10140 and rated to ISO 717-1. Used across Europe, India, the Gulf, Australia and most of Asia.
- STC — Sound Transmission Class, tested to ASTM E90 and rated to ASTM E413. Used in the United States and Canada.
- They sit close together — often within a point or two for a door — but they are not interchangeable, and a supplier who converts one to the other without saying so is guessing.
- Both describe a complete doorset. A leaf on its own has no rating in either system.
Sizing conventions change at the border
The same door is described three ways depending on where the drawing came from.
| Region | How doors are usually described | Watch for |
|---|---|---|
| India, Pakistan, Bangladesh | Feet and inches; frames quoted separately from shutters | Whether the size is the masonry opening or the chaukhat |
| UK, Ireland | Millimetres, standard leaf sizes; 1981 mm is the common height | An 8′ leaf is non-standard and will be made to order |
| Europe (DIN) | Millimetres, structural opening; doorsets quoted complete | Door and frame are normally bought as one tested unit |
| United States, Canada | Feet and inches; nominal slab sizes, rough opening separately | “Rough opening” is larger than the door — never the same figure |
| Gulf states | Millimetres, often to European doorset practice | Fire rating is frequently mandatory alongside acoustic |
| Australia, New Zealand | Millimetres; 2040 mm common height | Bushfire and weather ratings may apply at external doors |
Timber is local; the construction is not
What changes country to country is which hardwood is cheap and which is imported. The sandwich itself — facings, stable inner board, dense mineral wool, rebated meeting stile, sealed perimeter — is the same design anywhere.
- South Asia — teak, sal, sheesham; teak is the premium.
- Europe — oak, ash, beech; engineered cores are the norm.
- North America — oak, maple, poplar; solid-core factory doorsets dominate the acoustic market.
- Middle East — largely imported timber, strong joinery trade, frequent combined fire and acoustic requirements.
- Africa, South America — excellent local hardwoods, often paired with imported seals and hardware, which is where the lead time usually goes.
A brief that works in any language
Hand a maker these eight lines and you will get comparable quotes anywhere.
- Opening size, stating clearly whether it is structural opening, frame or clear width.
- Single or double leaf, and which way it opens.
- Timber species and grade, by name.
- Core construction — material, density, layers.
- Seals — head, jambs, meeting stile, and threshold drop seal, listed separately.
- Finish system and sheen.
- Hardware — material, finish and hinge count.
- Whether you need a tested rating, and to which standard. This is the line that decides whether you are buying joinery or a certified doorset.
Frequently asked questions
Can I convert an STC figure to Rw?
Not reliably. They usually land within a point or two for doors, but the test methods and the rating curves differ, and the gap widens at low frequencies. If a specification names a standard, get a test to that standard rather than a conversion.
Do I need a tested doorset, or is good joinery enough?
If a building code, a landlord or a consultant requires a number, you need a tested doorset and the certificate that goes with it. For a home or a small office where the goal is simply a quieter room, well-built and well-sealed joinery is usually better value and performs closer to the tested product than most people expect.
Does TrueInstaller have makers in my country?
The platform is strongest in India, and listings elsewhere are growing. Post your requirement and you will see who responds; if you build doors, you can list your workshop free.
Is shipping a finished door internationally sensible?
Rarely. A 5′9″ × 8′ double leaf set is heavy, bulky and easily damaged, and freight plus duty often exceeds the cost of having it made locally. Hardware and branded seals ship well; doors do not.
Related: Double leaf acoustic door specification · Makers in Ranchi · How soundproof doors actually work