How to Quote Aluminium Windows Without Losing Money on the Section

A flat rate per square foot is how aluminium fabricators lose jobs they should win and win jobs they should lose. Here is what actually drives the cost of a window, and how to put it in a quote.

Ask ten aluminium fabricators for a rate and you will get ten numbers between ₹300 and ₹800 a square foot. All ten are honest. The spread is not greed or ignorance — it is that a rate per square foot describes almost nothing about what is being supplied, and everyone fills the gap differently.

That ambiguity costs you twice. You lose jobs to a cheaper quote that is actually a cheaper product, and you win jobs where you quoted an average and the customer picked the expensive option within it.

Area is the smallest part of the price

Take a 5 ft by 4 ft sliding window. Twenty square feet, in everybody's arithmetic. Now price it three ways, all of them real:

  • A light domestic 27 mm sliding section — around ₹340 a square foot, so ₹6,800.
  • A heavier two-track two-panel system — around ₹520, so ₹10,400.
  • A thermal-break system — around ₹780, so ₹15,600.

Same twenty square feet. Two and a third times the price, and not one rupee of the difference is explained by the dimension that both of you measured. The section series is doing all the work, and in most quotations it is not written down at all.

Rates move with the aluminium market and with your city, so treat those figures as the shape of the problem rather than a price list. The ratio is the point.

The five things that should be on every line

A line in an aluminium quotation is not complete until it says:

  1. Where it is. "Living room" and "bedroom two" — because the customer checks the quote against their house, not against a drawing.
  2. What it is. Two-track two-panel sliding, fixed with openable, top hung, louvre.
  3. The section series. By name or by the profile dimension. This is the single line that decides whether you are comparable to the other quote.
  4. The glass. Thickness, and whether it is plain, toughened or laminated. Glass is often ten to fifteen percent of the window.
  5. The size and the area. So nobody has to trust your multiplication.

The items that are forgotten, in order of how often

From the complaints that reach a marketplace, the ranking is remarkably consistent:

  • Mosquito mesh shutters. The customer assumed they were in. You assumed they were extra. This is the most common argument in the trade.
  • Hardware beyond the basics. Better rollers, a proper multipoint lock, friction stays on top-hung units.
  • Removing and disposing of the old frames. Half a day and a tempo.
  • Making good around the frame. Whether you are filling and finishing the gap, or leaving it for the mason.
  • Site access. Fourth floor, no lift, narrow stair — that is real labour.

Each of these is a line with a price or a line that says "not included". Both are fine. Silence is what causes the dispute.

Why the cheaper quote is usually cheaper for a reason

When a customer brings you a quote that is thirty percent below yours, the instinct is to discount. Resist it for ten minutes and read the other quote instead. Nine times out of ten one of these is true:

  • It is a lighter section series, often one grade down.
  • The glass is 4 mm where you quoted 5, or plain where you quoted toughened.
  • Mesh is excluded.
  • The hardware is unbranded.
  • Fixing and finishing are the customer's problem.

You do not win that argument by saying the other fabricator is bad. You win it by handing the customer a quote that states all five things and inviting them to ask the other fabricator the same questions. Many customers will still take the cheaper one — that is their right — but a good number will not, and the ones who do not are better customers anyway.

Quote the upgrade as a line, not as a conversation

The most reliable way to increase the value of a job is to make the upgrade visible and priced. "Toughened glass in the two balcony units: +₹3,400" gets said yes to far more often than a verbal "we can do toughened if you want". The customer can see the decision and its cost, and they make it themselves.

A worked example you can copy

For a five-opening flat, the structure that avoids almost every argument:

  • Five lines, one per opening, each with location, type, series, size and area.
  • One line for glass, quantified in square feet at the thickness quoted.
  • One line for mesh shutters, with the count.
  • One line for hardware, by set.
  • One line for installation and fixing.
  • One line for transport and site access.
  • GST applied per line, because goods and labour are not the same rate.
  • Payment stages stated: advance, on delivery, on completion.

It takes longer to produce than a one-line rate, which is why most shops do not do it, and which is exactly why doing it sets you apart.

Further reading

Seven measurement mistakes that cost a remake · Why small jobs quietly lose money · Software that quotes this way

Get Expert Installers for How to Quote Aluminium Windows Without Losing Money on the Section
Share your requirement — we connect you with trusted, verified installers.
A free client account is created for you automatically — login details are emailed so you can track your requirement.

Looking for professional installation services?

Find Installers Register as Installer