Steel Railing Quotation Software — Free Estimates by Running Foot

Make stainless and MS railing quotations by the running foot with the grade, pipe size and baluster pitch stated. Free railing estimate software for balcony, staircase and glass railing work.

Railing is the easiest thing in this trade to quote and the easiest to get wrong. You measure the run, multiply by a rate, and send the number. The customer gets three quotes that all look like one number, picks the lowest, and you find out six months later that the winner used 202 at a six-inch pitch where you had priced 304 at four.

The fix is not a lower rate. It is a quotation that says what the rate buys.

Railing measured in running feet with the variables that change the rate

Features

Quote by running foot, by the piece, or both

Straight runs go in as running feet. Gates, end posts, curved sections and landings go in as pieces at their own price. A staircase with three flights and two landings is one document.

Grade and pipe specification on the line

SS 202, 304 or 316; pipe diameter and wall thickness; MS with a stated finish. These are the numbers that separate your quote from a cheaper one, so they belong on the paper rather than in your head.

Baluster pitch as a stated figure

The spacing between verticals changes the amount of steel in a run by half. Quoting a four-inch pitch against somebody's six-inch pitch at the same rate per foot is not losing on price; it is losing on a comparison nobody made explicit.

Infill priced separately

Glass, vertical pipes, cable, mesh or flat bar — each as its own line with its own rate, so changing the infill visibly changes the price.

Handrail, fittings and mounting

Handrail profile, end caps, elbows, flanges, base plates, anchor bolts and whether the mount is to the floor or the side of the slab. Side mounting costs more and takes longer, and it should say so.

Finish

Mirror, matt, brushed or powder coat, as a priced line.

PDF, WhatsApp and invoice carry-through

Generate the quotation on your letterhead, share it, and when approved carry the same lines into the GST invoice.

Benefits

  • You compete on specification instead of on rate. A quote that states 304, 2 inch × 1.5 mm, four-inch pitch, mirror finish is a different product from "SS railing – ₹X per foot".
  • Glass railing becomes quotable in minutes. Glass as its own line with its own thickness and spigot type, rather than a number you work out on paper each time.
  • Staircases stop being guesswork. Flights, landings and the gate are separate lines that add up correctly.
  • Site conditions can be charged. Third floor with no lift, or drilling into an existing granite nosing, are real costs that can be named.
  • Repeat work is fast. Apartment blocks are the same railing forty times; quote it once and reuse it.

How it works

  1. Open a quotation for the customer and site.
  2. Add each run as a line in running feet, with its location.
  3. State the grade, pipe size and pitch on the line.
  4. Add infill — glass, pipes or cable — as its own line.
  5. Add fittings, mounting and finish.
  6. Add transport and site access charges if they apply.
  7. Apply GST and send the PDF.

Who this is for

Stainless and MS railing fabricators; balcony and staircase specialists; glass railing installers; and shops quoting apartment projects where the same detail repeats across floors.

Frequently asked questions

Should railing be quoted per running foot or per square foot?

Running foot is the normal measure in India, because the height is standard within a job. Where heights vary a lot — a stepped terrace, for example — square foot or a per-piece price for the odd sections is clearer. The software supports both in the same document.

Can I quote glass railing in it?

Yes. The glass is a line with its own thickness and rate, and the spigots, channel or standoffs are their own items.

Does it include a rate list for SS railing?

No, and deliberately. Rates vary by city, by grade and by what you pay your supplier this month. You enter your own, and they stay private to your account.

Can I make a quotation on site from my phone?

Yes, from the Android app or the website on a mobile browser. Measure the run, enter the line, generate the PDF before you leave.

How do I handle a customer who wants to compare 202 and 304?

Quote both as revisions on the same customer record. Both versions stay on file, and the price difference against a stated grade is the most persuasive argument in this trade.

Is the railing quotation software free to use?

Yes, along with invoices, measurement sheets and payment tracking.

Related

Steel fabrication quotation software · Measurement sheets · Site visit management · Cost calculators

Start using it

Create an account, open a quotation, and see whether the numbers come out the way you work. Nothing is charged for the tools listed above, and there is no trial clock running in the background.

Create a free account · See every tool · What is free and what is paid

Ready to try it on your next job?

Create a free account See all the tools