Steel Fabrication Quotation Software — Quote by Weight, Free

Quote MS and stainless fabrication by calculated weight rather than by eye. Free software for steel fabricators: section weights, rate per kg, finish and hardware lines, GST and invoices.

Steel fabrication is sold by weight, and weight is the one number most shops never actually calculate. The quote goes out at a rate per kilogram against an estimate of how heavy the job will be, the estimate is made from experience, and experience is wrong by fifteen percent roughly as often as it is right.

When it is wrong upwards, you lose the job. When it is wrong downwards, you win it and pay for the difference yourself.

Calculating the weight of MS square tube and pricing it by the kilogram

Features

Lines built around how steel is sold

Each item carries its section, its length or quantity, and its rate. A gate is not one line at a guessed weight; it is the frame sections, the infill, the hardware and the finish, each priced the way you buy them.

Rate per kilogram, per running foot, per piece or lump sum

Different items in the same job are sold differently. A grill is per square foot, a handrail is per running foot, a fabricated bracket is per piece, and site welding is a lump sum. All four can sit in one quotation with their own measure.

Material grade on the line

MS, SS 202, SS 304 and SS 316 are four different prices and four different lifespans. Recording the grade stops the conversation where the customer compares your 304 against somebody's 202.

Finish as a priced item

Red oxide and two coats of enamel is a different cost from a zinc-rich primer system or powder coating at 60 microns. Quote the system, not "painted".

Hardware, fixing and transport

Hinges, locks, wheels, bearings, anchor bolts, chemical anchors, lifting and site fixing — each is a line rather than an assumption.

GST and your own invoice format

Tax per line, your letterhead, your GSTIN, your terms and payment stages. Goods and fabrication labour can carry their own HSN or SAC.

The quotation becomes the invoice

When the job is approved, the same lines carry into a GST invoice instead of being typed again from the quotation.

Benefits

  • Your rate per kilo can be defended. When the weight is calculated and the finish is specified, a lower competing quote has to show where it is saving — and it is almost always in the wall thickness.
  • Short runs stop being quietly unprofitable. Cutting waste and setup time on a two-gate job are real and can be charged as named items instead of hoped for.
  • Material price moves are easy to pass on. Change the rate per kilo on the next quotation rather than rebuilding your whole mental price list.
  • Mixed jobs stay in one document. A job with a gate, a grill, a staircase railing and some site welding is one quotation, correctly totalled.
  • Every past quotation is searchable. When a repeat customer asks for "the same as last time", last time is open in front of you.

How it works

  1. Start a quotation against the customer and the site.
  2. Add an item per fabricated element — main gate, window grills, railing, shed frame.
  3. Choose how that item is measured: by weight, by area, by running foot, per piece or lump sum.
  4. Record the section and grade so the specification reaches the printed page.
  5. Add the finish system, the hardware and the fixing.
  6. Add transport, lifting and any site charges.
  7. Apply GST, generate the PDF and send it.

Who this is for

MS and stainless fabrication shops; gate, grill and railing makers; shed and structural fabricators quoting by weight; and job workers who want a document that holds up when the customer compares three quotes.

Frequently asked questions

Does the software calculate section weights for me?

You enter the weight or the quantity for each line. The standard formula for a square or rectangular hollow section is (width + height − thickness) × 2 × thickness × 0.00785 kilograms per metre for mild steel, and the diagram above works an example through. The software does the pricing arithmetic, the totals and the tax.

Can I quote by weight for some items and by square foot for others?

Yes. Each line carries its own measure, so a single quotation can mix kilograms, square feet, running feet, pieces and lump sums.

Is it only for mild steel?

No. MS and all the common stainless grades are handled the same way — the grade is recorded on the line and the rate reflects it.

Can I bill by actual weight after fabrication?

Yes. Raise the invoice from the quotation and adjust the quantity to the weighed figure. The quotation stays on record showing what was estimated, which is what prevents the argument.

Does it do structural design or load calculations?

No. This is a commercial document — pricing, specification, tax and records. Design and load checking are an engineer's job.

Is the steel fabrication quotation software free?

Yes. Quotations, invoices, measurement sheets, site visits and payment tracking are in the free account.

Related

Steel railing quotation software · GST invoice and billing · Payment tracking · Why small jobs lose money

Start using it

Create an account, open a quotation, and see whether the numbers come out the way you work. Nothing is charged for the tools listed above, and there is no trial clock running in the background.

Create a free account · See every tool · What is free and what is paid

Ready to try it on your next job?

Create a free account See all the tools